MicroMatic Beer Pump
A cropped merino wool cardigan taken up a notch, thanks to the flecks of metallic thread throughout. We love it even more paired with the matching sweater-pants.
Air or CO2 operated. Control flow rate while maintaining brewer recommended applied pressure on the keg or serving vessel. This beer pump increase the pressure in the product dispense line, which ensures that the inherent gas in the solution (beer) cannot break out. The air or gas used to power this pump never comes in contact with the beer, thus providing protection from flat or tainted beer due to impure air contamination or oxidation.
Installation:
The pressure to the keg in a pump system should always be only the pressure and type of gas the brewer recommends to maintain the carbonation level in the keg. The operating pressure to the pump is used to control the flow rate. Due to the pumps powerful hydraulic push against the beer, the system must be considerably over restricted.
Mounting:
- Pump must be located within 10 feet above the keg
- Pump ports must be facing down to maximize pump performance
- Mounting grommets are part of pump assembly, and add stability
- Fasten pump securely to wall or rack
- If using a FOB, mount it slightly above and directly after the discharge of the pump
CAUTION: If a FOB is not used, the pump will continue to cycle after the keg has emptied
Hose Connections:
- All fittings are quick change
- Be sure the brass CO2 fitting is installed all the way and the retainer clip is engaged
- Use brewery approved tubing between the pump and the faucet. Allow at least two feet extra tubing to the CO2 inlet and the beer inlets/outlets to provide a service loop
- Secure with the appropriate clamp
- It is advisable to secure all hoses to prevent excessive movement
- If pump is installed in an enclosed area such as a closet, basement or walk-in cooler, connection of a hose to the gas discharge fitting must be done to vent CO2 to the atmosphere safely. The muffler on the CO2 exhaust can be removed with pliers
Operation Start - Up:
To start pump operation, set pressure to 15 PSI and adjust up until desired flow rate is obtained. Once primed, pump will operate automatically by starting and stopping on demand, as the faucet is opened and closed. Beer flow can be adjusted by increasing or decreasing gas pressure to the pump.
Warning:
- If used with CO2 or nitrogen, be sure the area is well ventilated.
- Only use pump with specified products.
- Do not pump flammable liquids or use where flammable vapors are present.
Shipping Information
At Brew Craftory (operated by BEERDRINKERS LLC), we understand that getting your brewing equipment quickly is important for your brewing schedule. We've partnered with reliable carriers to ensure safe and timely delivery.
Order Processing Time
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays.
Once your order has been processed and shipped, you will receive a confirmation email with tracking information to monitor your package's progress.
Shipping Methods & Delivery Times
Standard Items:
- We ship via FedEx, UPS, or USPS
- Estimated delivery time: 7-10 business days
- Tracking information provided for all shipments
Large/Heavy Items:
- Shipped via Motor Freight carriers
- Standard curbside delivery
- Estimated delivery time: 7-10 business days
- Customer will be contacted to schedule delivery
Shipping Rates
- FREE SHIPPING on all orders over $100
- Flat Rate Shipping: $8.99 for orders under $100
- Shipping costs are calculated and displayed at checkout before order completion
Expedited Shipping: If you require faster shipping, please call our Customer Service Department at (720) 471-5468 for expedited shipping rates.
Delivery Schedule
- Orders ship Monday through Friday
- No shipments or deliveries on Saturdays, Sundays, or federal holidays
- Business days exclude weekends and holidays
Shipping Destinations
BrewCraftory does not currently offer shipping outside of the contiguous United States. International shipping is not available at this time.
Hawaii and Alaska: Please contact our Sales Department at (720) 471-5468 for shipping rates and warranty information for products shipped to Hawaii and Alaska.
Shipping Restrictions
- Some items may have shipping restrictions due to size, weight, or hazardous materials regulations
- Restricted items will be clearly marked on product pages
- We cannot ship to P.O. Boxes for freight deliveries
Order Tracking
Once your order ships, you will receive an email with:
- Tracking number
- Carrier information
- Estimated delivery date
- Link to track your package
Delivery Issues
- Signature may be required for high-value orders
- Please ensure someone is available to receive large freight deliveries
- IMPORTANT: Carefully inspect all merchandise before signing the release with the freight carrier
- For missed deliveries, contact the carrier directly using the tracking information provided
Important Notes
Brew Craftory (operated by BEERDRINKERS LLC) is not responsible for shipping delays due to:
- Weather conditions
- Mechanical failures
- Carrier delays
- Natural disasters
- Incorrect shipping addresses provided by customer
- Typographical and/or transcribing errors
- Other factors beyond our control
Damaged or Lost Packages
- Inspect packages upon delivery
- Report any damage to the carrier immediately
- Contact us within 48 hours of delivery for damaged items
- Keep all packaging materials for insurance claims
Address Accuracy
Please ensure your shipping address is correct before completing your order. We are not responsible for packages delivered to incorrect addresses provided by customers.
International Shipping
Currently, we only ship within the United States. We're working on international shipping options for the future.
Contact Us
For questions about your order or shipping, please contact us:
- Email: sales@BrewCraftory.com
- Phone: (720) 471-5468
- Hours: Monday-Friday, 9:00 AM - 5:00 PM EST
Policy Updates
This shipping policy is subject to change without notice. Please review this page periodically for updates.
Last updated: 01/21/2025
