MicroMatic Shurflo Beer Pump
A cropped merino wool cardigan taken up a notch, thanks to the flecks of metallic thread throughout. We love it even more paired with the matching sweater-pants.
Micromatic MP-090 Shurflo Beer Pump has been designed to accept pressurized beer and lagers, directly from the keg. It operates on either a supply of CO2, mixed gas, or from a clean dry source of compressed air. The pump will hold a pressure up to 85 psi (5.8 bar), enabling greater dispense distances and lifts to be achieved, while not affecting the carbonation levels of the product as intended by the brewer.
It is designed as a gas driven demand pump that supplies one to three taps up to 150 metres (500 feet) from a keg with a flow rate of 3.8 - 11.4 l/min. Actual flow rates will be determined by the length of run, line size, vertical lift, keg top pressure and the number of taps being used. This pump will operate automatically when a tap is opened.
Installation:
The pressure to the keg in a pump system should always be only the pressure and type of gas the brewer recommends to maintain the carbonation level in the keg. The operating pressure to the pump is used to control the flow rate. Due to the pumps powerful hydraulic push against the beer, the system must be considerably over restricted.
Mounting:
- The outlet port of the pump is to be mounted vertical
- A minimal length of tubing between the FOB and the pump is recommended, as degassing within the inlet may be evident during shut-off. Most beers will allow re-suspension of carbonation when under higher outlet pressure. Inlet tubing should not exceed 10 feet
- Use brewery approved tubing from beer pump to the faucet. Cut outlet and CO2 tubing at least two (2) feet longer than necessary to provide a service loop
- Use new pressure tubing to the pump CO2 inlet. The gas used to drive the pump must be clean and contain no contaminants (water, rust, oil, etc.). Air compressors may be used with proper particle filters and moisture separators. Air storage tanks should be drained weekly
Operation Start-Up:
- Connect the coupler to the keg
- Adjust the regulator supplying the beer pump to 20 psi allowing the pump to stroke slowly
- Allow beer to flow from the faucet until all the air trapped within the tubing has been purged
- Once the air has been purged, adjust the beer pump regulator to the pressure necessary to achieve the desired flow at the faucet. Minimum pressure is 25 psi with a maximum of 85 psi
Warning:
- If used with CO2 or nitrogen, be sure the area is well ventilated.
- Only use pump with specified products.
- Do not pump flammable liquids or use where flammable vapors are present.
Shipping Information
At Brew Craftory (operated by BEERDRINKERS LLC), we understand that getting your brewing equipment quickly is important for your brewing schedule. We've partnered with reliable carriers to ensure safe and timely delivery.
Order Processing Time
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays.
Once your order has been processed and shipped, you will receive a confirmation email with tracking information to monitor your package's progress.
Shipping Methods & Delivery Times
Standard Items:
- We ship via FedEx, UPS, or USPS
- Estimated delivery time: 7-10 business days
- Tracking information provided for all shipments
Large/Heavy Items:
- Shipped via Motor Freight carriers
- Standard curbside delivery
- Estimated delivery time: 7-10 business days
- Customer will be contacted to schedule delivery
Shipping Rates
- FREE SHIPPING on all orders over $100
- Flat Rate Shipping: $8.99 for orders under $100
- Shipping costs are calculated and displayed at checkout before order completion
Expedited Shipping: If you require faster shipping, please call our Customer Service Department at (720) 471-5468 for expedited shipping rates.
Delivery Schedule
- Orders ship Monday through Friday
- No shipments or deliveries on Saturdays, Sundays, or federal holidays
- Business days exclude weekends and holidays
Shipping Destinations
BrewCraftory does not currently offer shipping outside of the contiguous United States. International shipping is not available at this time.
Hawaii and Alaska: Please contact our Sales Department at (720) 471-5468 for shipping rates and warranty information for products shipped to Hawaii and Alaska.
Shipping Restrictions
- Some items may have shipping restrictions due to size, weight, or hazardous materials regulations
- Restricted items will be clearly marked on product pages
- We cannot ship to P.O. Boxes for freight deliveries
Order Tracking
Once your order ships, you will receive an email with:
- Tracking number
- Carrier information
- Estimated delivery date
- Link to track your package
Delivery Issues
- Signature may be required for high-value orders
- Please ensure someone is available to receive large freight deliveries
- IMPORTANT: Carefully inspect all merchandise before signing the release with the freight carrier
- For missed deliveries, contact the carrier directly using the tracking information provided
Important Notes
Brew Craftory (operated by BEERDRINKERS LLC) is not responsible for shipping delays due to:
- Weather conditions
- Mechanical failures
- Carrier delays
- Natural disasters
- Incorrect shipping addresses provided by customer
- Typographical and/or transcribing errors
- Other factors beyond our control
Damaged or Lost Packages
- Inspect packages upon delivery
- Report any damage to the carrier immediately
- Contact us within 48 hours of delivery for damaged items
- Keep all packaging materials for insurance claims
Address Accuracy
Please ensure your shipping address is correct before completing your order. We are not responsible for packages delivered to incorrect addresses provided by customers.
International Shipping
Currently, we only ship within the United States. We're working on international shipping options for the future.
Contact Us
For questions about your order or shipping, please contact us:
- Email: sales@BrewCraftory.com
- Phone: (720) 471-5468
- Hours: Monday-Friday, 9:00 AM - 5:00 PM EST
Policy Updates
This shipping policy is subject to change without notice. Please review this page periodically for updates.
Last updated: 01/21/2025
